We do have the replacement red lens for the Wesbar Single Agriculture Light - Red/Black W8260501; what you need is the following part:
- Replacement Acrylic Lens for Wesbar Agriculture Lights - Red # W802651 view full answer...
For an amber agricultural light I recommend # W8260601 which was designed for this purpose. You could add # W002515 to wire it up.
We also have amber flashing warning lights like # SLL43AB1 and # SLL43AB2 that can be wired to flash alternately. You would also need harness # A45PB for each and a grommet to mount them # A45GB. I have included a video review of these lights for you.
The Optronics light # STL51AB you referenced is designed as a parking and turn signal light rather than a... view full answer...
The Wesbar LED agricultural light part # 54209-048 does have three wires but the white wire is a little hard to see in some of the pictures. view full answer...
Yes the three wires in the plug on the WesBar Heavy-Duty Wiring Cable for Wesbar Agricultural Lights part # W002515 is the three that you have said. The ground, running light and the stop/turn signals. view full answer...
Yes, the Custer Lite-It Wireless LED Agricultural Tow Lights # LIW-AGKIT-SG that you referenced does use 2-1/2 inch standard lights like the # MCL59AB. view full answer...
Since you want the red and amber lenses to match up correctly the better choice for you would be the Wesbar LED Agricultural Light with Brake Light # W54209-021 for the passenger side and then the # W54209-007 for the driver side. view full answer...
I reached out to the manufacturer and the Wesbar LED Agricultural Light - Single Sided - Stud Mount - Red - Qty 1, # 54209-032 are rated to handle the 24 volt system. They are rated up to 28 volts. view full answer...
Wesbar Stud Mount LED Agricultural Light # 54209-032 is a 3-function water-proof light that provides taillights, stop lights and turn signals. The 3-wire connection has a white ground wire, a black wire for running lights and a red wire for stop signals. Please refer to the linked video.
Because this light uses high-efficiency LEDs instead of standard incandescent bulbs it will be both brighter and draw much less power - roughly one-tenth - than a standard trailer light. The necessary... view full answer...
Yes, the Wesbar LED Agricultural Light # 54209-032 that you referenced would work well for what you are trying to do. It is dual intensity which means that it can cover the dimmer and brighter light functions needed for running lights and blinkers/stop circuit.
It also runs off of 12 volts too.
Check out the review video I attached for more info as well. view full answer...
The Heavy-Duty Wiring Cable for Wesbar Agricultural Lights # W002515 could be used for replacement trailer wiring if you wanted. The jacketed pin on the 4-way side is the ground pin and the exposed pin on the other 3-pin connectors is the ground for each assembly. view full answer...
I confirmed with my contact at Wesbar that the # 54209-031 Agricultural light is compatible with the flasher on your 1983 John Deere 755 tractor. I can't confirm the case is the same for the Stanley light (pictured) though so your best bet is to replace them with the # 54003-041.
It looks like the flasher works on a 12 volt circuit which matches what's labeled on the light housing of your Stanley light so the voltage shouldn't be the issue. That being said, certain lights are not compatible... view full answer...
The Wesbar light part # 54209-011 is only designed to have the running light circuit ran to it which is why it only has amber lenses. So you'd need to the running light circuit to the brown wire and then ground the white wire. view full answer...
I believe what you're needing is the Junction Box and Installation Kit # 3430001-JBK along with the Pollak Heavy-Duty, 7-Pole, Round Pin Trailer Wiring Socket # PK11720 and then 8' - 10' of the Deka Wire - Jacketed 7-Wire # DW04914-1 (sold by the foot).
Typically the junction box is located on the trailer side of things so there aren't any kits that come with the tow vehicle connector, but this combination should do the trick! The junction box comes with all of the connections you need... view full answer...
The price difference between The Wesbar LED Light kit # 54003-041 and the Wesbar Incandescent Light Kit # W002676 is due to the cost of producing LED lights versus incandescent light bulbs. LED light are quite a bit more expensive to make than incandescent lights. That being said, LED lights will last longer and use less power than their incandescent counter parts, so I do suggest going with the LED option.
It should be noted that both the LED # 54003-041 and Incandescent # W002676 will... view full answer...
Per Roadmaster, for your Roadmaster Standard Magnetic Tow Lights, # RM-2120, any replacement lens with a 4-1/4 inch overall diameter that snaps onto the light housing will work. We have the Replacement Lens for Optronics Tail Lights, # A24RB for red.
For amber color, the Replacement Acrylic Lens for Wesbar Agriculture Lights, # W802650 is 4-14" as well as the Replacement Lens for Round Trailer Clearance and Side Marker Light, # A52AB. view full answer...
We do offer wireless lights however; they are going to be magnetic. They are the Custer Lite-It Wireless LED Agricultural Tow Lights - Magnetic - 7-Way Blade Connector - Green Item # LIW-AGKIT-SG. These give you all the proper lighting functions so your are safe and legal. Brake lights, turn signals, tail lights, and flashers. view full answer...
7-way trailer connectors can be wired in several ways and heavy-duty commercial/agricultural round-pin 7-way wiring can be different too. Please refer to the linked image to see the different vehicle-side connectors and their common wiring configurations.
To use your trailers that have plugs like # PK11702 with your F-250 you will need to install a socket such as # PK11720. A circuit tester like # PTW2993 will help you identify the function on each wire of the truck's existing 7-way. The... view full answer...
The closest LED option we have available to the Optronics Pedestal Mount Tail Light # ST51RB that you referenced is with the Wesbar LED Agricultural Light # 54209-032. This is a round, single-sided light that will give you the needed stop, turn, and tail lights on your trailer. It measures 4-3/4 inches in diameter and features the same stud/pedestal mount design as the Optronics option.
I have attached a short video demonstration on this product that you can also check out. view full answer...